Angular CLI builders link

A number of Angular CLI commands run a complex process on your code, such as linting, building, or testing. The commands use an internal tool called Architect to run CLI builders , which apply another tool to accomplish the wanted task.

With Angular version 8, the CLI Builder API is stable and available to developers who want to customize the Angular CLI by adding or modifying commands. For example, you could supply a builder to perform an entirely new task, or to change which third-party tool is used by an existing command.

This document explains how CLI builders integrate with the workspace configuration file, and shows how you can create your own builder.

CLI builders link

The internal Architect tool delegates work to handler functions called builders . A builder handler function receives two arguments; a set of input options (a JSON object), and a context (a BuilderContext object).

The separation of concerns here is the same as with schematics, which are used for other CLI commands that touch your code (such as ng generate ).

• The options object is provided by the CLI user, while the context object is provided by the CLI Builder API
• In addition to the contextual information, the context object, which is an instance of the BuilderContext , also provides access to a scheduling method, context.scheduleTarget() . The scheduler executes the builder handler function with a given target configuration.

The builder handler function can be synchronous (return a value) or asynchronous (return a Promise), or it can watch and return multiple values (return an Observable). The return value or values must always be of type BuilderOutput . This object contains a Boolean success field and an optional error field that can contain an error message.

Angular provides some builders that are used by the CLI for commands such as ng build and ng test . Default target configurations for these and other built-in CLI builders can be found (and customized) in the "architect" section of the workspace configuration file, angular.json . Also, extend and customize Angular by creating your own builders, which you can run using the ng run CLI command.

Builder project structure link

A builder resides in a "project" folder that is similar in structure to an Angular workspace, with global configuration files at the top level, and more specific configuration in a source folder with the code files that define the behavior. For example, your myBuilder folder could contain the following files.

Publish the builder to npm (see Publishing your Library). If you publish it as @example/my-builder , install it using the following command.

      
        content_copy
      
      npm install @example/my-builder
    

Creating a builder link

As an example, create a builder that copies a file. To create a builder, use the createBuilder() CLI Builder function, and return a Promise<BuilderOutput> object.

      
        content_copy
      
      import { BuilderContext, BuilderOutput, createBuilder } from '@angular-devkit/architect';
import { JsonObject } from '@angular-devkit/core';

interface Options extends JsonObject {
  source: string;
  destination: string;
}

export default createBuilder(copyFileBuilder);

async function copyFileBuilder(
  options: Options,
  context: BuilderContext,
): Promise<BuilderOutput> {
}
    

Now let's add some logic to it. The following code retrieves the source and destination file paths from user options and copies the file from the source to the destination (using the Promise version of the built-in NodeJS copyFile() function). If the copy operation fails, it returns an error with a message about the underlying problem.

      
        content_copy
      
      import { BuilderContext, BuilderOutput, createBuilder } from '@angular-devkit/architect';
import { JsonObject } from '@angular-devkit/core';
import { promises as fs } from 'fs';

interface Options extends JsonObject {
  source: string;
  destination: string;
}

export default createBuilder(copyFileBuilder);

async function copyFileBuilder(
  options: Options,
  context: BuilderContext,
): Promise<BuilderOutput> {
  try {
    await fs.copyFile(options.source, options.destination);
  } catch (err) {
    return {
      success: false,
      error: err.message,
    };
  }

  return { success: true };
}
    

Handling output link

By default, copyFile() does not print anything to the process standard output or error. If an error occurs, it might be difficult to understand exactly what the builder was trying to do when the problem occurred. Add some additional context by logging additional information using the Logger API. This also lets the builder itself be executed in a separate process, even if the standard output and error are deactivated (as in an Electron app).

You can retrieve a Logger instance from the context.

      
        content_copy
      
      import { BuilderContext, BuilderOutput, createBuilder } from '@angular-devkit/architect';
import { JsonObject } from '@angular-devkit/core';
import { promises as fs } from 'fs';

interface Options extends JsonObject {
  source: string;
  destination: string;
}

export default createBuilder(copyFileBuilder);

async function copyFileBuilder(
  options: Options,
  context: BuilderContext,
): Promise<BuilderOutput> {
  try {
    await fs.copyFile(options.source, options.destination);
  } catch (err) {
    context.logger.error('Failed to copy file.');
    return {
      success: false,
      error: err.message,
    };
  }

  return { success: true };
}
    

Progress and status reporting link

The CLI Builder API includes progress and status reporting tools, which can provide hints for certain functions and interfaces.

To report progress, use the context.reportProgress() method, which takes a current value, (optional) total, and status string as arguments. The total can be any number; for example, if you know how many files you have to process, the total could be the number of files, and current should be the number processed so far. The status string is unmodified unless you pass in a new string value.

You can see an example of how the tslint builder reports progress.

In our example, the copy operation either finishes or is still executing, so there's no need for a progress report, but you can report status so that a parent builder that called our builder would know what's going on. Use the context.reportStatus() method to generate a status string of any length.

Pass an empty string to remove the status.

      
        content_copy
      
      import { BuilderContext, BuilderOutput, createBuilder } from '@angular-devkit/architect';
import { JsonObject } from '@angular-devkit/core';
import { promises as fs } from 'fs';

interface Options extends JsonObject {
  source: string;
  destination: string;
}

export default createBuilder(copyFileBuilder);

async function copyFileBuilder(
  options: Options,
  context: BuilderContext,
): Promise<BuilderOutput> {
  context.reportStatus(`Copying ${options.source} to ${options.destination}.`);
  try {
    await fs.copyFile(options.source, options.destination);
  } catch (err) {
    context.logger.error('Failed to copy file.');
    return {
      success: false,
      error: err.message,
    };
  }

  context.reportStatus('Done.');
  return { success: true };
}
    

Builder input link

You can invoke a builder indirectly through a CLI command, or directly with the Angular CLI ng run command. In either case, you must provide required inputs, but can let other inputs default to values that are pre-configured for a specific target , provide a pre-defined, named override configuration, and provide further override option values on the command line.

Input validation link

You define builder inputs in a JSON schema associated with that builder. The Architect tool collects the resolved input values into an options object, and validates their types against the schema before passing them to the builder function. (The Schematics library does the same kind of validation of user input.)

For our example builder, you expect the options value to be a JsonObject with two keys: A source and a destination , each of which are a string.

You can provide the following schema for type validation of these values.

      
        content_copy
      
      {
  "$schema": "http://json-schema.org/schema",
  "type": "object",
  "properties": {
    "source": {
      "type": "string"
    },
    "destination": {
      "type": "string"
    }
  }
}
    

To link our builder implementation with its schema and name, you need to create a builder definition file, which you can point to in package.json .

Create a file named builders.json that looks like this:

      
        content_copy
      
      {
  "builders": {
    "copy": {
      "implementation": "./dist/my-builder.js",
      "schema": "./src/schema.json",
      "description": "Copies a file."
    }
  }
}
    

In the package.json file, add a builders key that tells the Architect tool where to find our builder definition file.

      
        content_copy
      
      {
  "name": "@example/copy-file",
  "version": "1.0.0",
  "description": "Builder for copying files",
  "builders": "builders.json",
  "dependencies": {
    "@angular-devkit/architect": "~0.1200.0",
    "@angular-devkit/core": "^12.0.0"
  }
}
    

The official name of our builder is now @example/copy-file:copy . The first part of this is the package name (resolved using node resolution), and the second part is the builder name (resolved using the builders.json file).

Using one of our options is very straightforward. You did this in the previous section when you accessed options.source and options.destination .

      
        content_copy
      
      context.reportStatus(`Copying ${options.source} to ${options.destination}.`);
try {
  await fs.copyFile(options.source, options.destination);
} catch (err) {
  context.logger.error('Failed to copy file.');
  return {
    success: false,
    error: err.message,
  };
}

context.reportStatus('Done.');
return { success: true };
    

Target configuration link

A builder must have a defined target that associates it with a specific input configuration and project.

Targets are defined in the angular.json CLI configuration file. A target specifies the builder to use, its default options configuration, and named alternative configurations. The Architect tool uses the target definition to resolve input options for a given run.

The angular.json file has a section for each project, and the "architect" section of each project configures targets for builders used by CLI commands such as 'build', 'test', and 'lint'. By default, for example, the build command runs the builder @angular-devkit/build-angular:browser to perform the build task, and passes in default option values as specified for the build target in angular.json .

      
        content_copy
      
      {
  "myApp": {
    …
    "architect": {
      "build": {
        "builder": "@angular-devkit/build-angular:browser",
        "options": {
          "outputPath": "dist/myApp",
          "index": "src/index.html",
          …
        },
        "configurations": {
          "production": {
            "fileReplacements": [
              {
                "replace": "src/environments/environment.ts",
                "with": "src/environments/environment.prod.ts"
              }
            ],
            "optimization": true,
            "outputHashing": "all",
            …
          }
        }
      },
      …
    

The command passes the builder the set of default options specified in the "options" section. If you pass the --configuration=production flag, it uses the override values specified in the production alternative configuration. Specify further option overrides individually on the command line. You might also add more alternative configurations to the build target, to define other environments such as stage or qa .

Target strings link

The generic ng run CLI command takes as its first argument a target string of the following form.

      
        content_copy
      
      project:target[:configuration]
    

If your builder calls another builder, it might need to read a passed target string. Parse this string into an object by using the targetFromTargetString() utility function from @angular-devkit/architect .

Schedule and run link

Architect runs builders asynchronously. To invoke a builder, you schedule a task to be run when all configuration resolution is complete.

The builder function is not executed until the scheduler returns a BuilderRun control object. The CLI typically schedules tasks by calling the context.scheduleTarget() function, and then resolves input options using the target definition in the angular.json file.

Architect resolves input options for a given target by taking the default options object, then overwriting values from the configuration used (if any), then further overwriting values from the overrides object passed to context.scheduleTarget() . For the Angular CLI, the overrides object is built from command line arguments.

Architect validates the resulting options values against the schema of the builder. If inputs are valid, Architect creates the context and executes the builder.

For more information see Workspace Configuration.

Default architect configuration link

Let's create a simple angular.json file that puts target configurations into context.

You can publish the builder to npm (see Publishing your Library), and install it using the following command:

      
        content_copy
      
      npm install @example/copy-file
    

If you create a new project with ng new builder-test , the generated angular.json file looks something like this, with only default builder configurations.

      
        content_copy
      
      {
  // …
  "projects": {
    // …
    "builder-test": {
      // …
      "architect": {
        // …
        "build": {
          "builder": "@angular-devkit/build-angular:browser",
          "options": {
            // … more options…
            "outputPath": "dist/builder-test",
            "index": "src/index.html",
            "main": "src/main.ts",
            "polyfills": "src/polyfills.ts",
            "tsConfig": "src/tsconfig.app.json"
          },
          "configurations": {
            "production": {
              // … more options…
              "optimization": true,
              "aot": true,
              "buildOptimizer": true
            }
          }
        }
      }
    }
  }
  // …
}
    

Adding a target link

Add a new target that will run our builder to copy a file. This target tells the builder to copy the package.json file.

You need to update the angular.json file to add a target for this builder to the "architect" section of our new project.

• We'll add a new target section to the "architect" object for our project

• The target named "copy-package" uses our builder, which you published to @example/copy-file . (See Publishing your Library.)

• The options object provides default values for the two inputs that you defined; source , which is the existing file you are copying, and destination , the path you want to copy to

• The configurations key is optional, we'll leave it out for now

      
        content_copy
      
      {
  "projects": {
    "builder-test": {
      "architect": {
        "copy-package": {
          "builder": "@example/copy-file:copy",
          "options": {
            "source": "package.json",
            "destination": "package-copy.json"
          }
        },
        "build": {
          "builder": "@angular-devkit/build-angular:browser",
          "options": {
            "outputPath": "dist/builder-test",
            "index": "src/index.html",
            "main": "src/main.ts",
            "polyfills": "src/polyfills.ts",
            "tsConfig": "src/tsconfig.app.json"
          },
          "configurations": {
            "production": {
              "fileReplacements": [
                {
                  "replace": "src/environments/environment.ts",
                  "with": "src/environments/environment.prod.ts"
                }
              ],
              "optimization": true,
              "aot": true,
              "buildOptimizer": true
            }
          }
        }
      }
    }
  }
}
    

Running the builder link

To run our builder with the new target's default configuration, use the following CLI command.

      
        content_copy
      
      ng run builder-test:copy-package
    

This copies the package.json file to package-copy.json .

Use command-line arguments to override the configured defaults. For example, to run with a different destination value, use the following CLI command.

      
        content_copy
      
      ng run builder-test:copy-package --destination=package-other.json
    

This copies the file to package-other.json instead of package-copy.json . Because you did not override the source option, it will copy from the package.json file (the default value provided for the target).

Testing a builder link

Use integration testing for your builder, so that you can use the Architect scheduler to create a context, as in this example.

• In the builder source directory, you have created a new test file my-builder.spec.ts . The code creates new instances of JsonSchemaRegistry (for schema validation), TestingArchitectHost (an in-memory implementation of ArchitectHost ), and Architect .

• We've added a builders.json file next to the builder's package.json file, and modified the package file to point to it.

Here's an example of a test that runs the copy file builder. The test uses the builder to copy the package.json file and validates that the copied file's contents are the same as the source.

      
        content_copy
      
      import { Architect } from '@angular-devkit/architect';
import { TestingArchitectHost } from '@angular-devkit/architect/testing';
import { schema } from '@angular-devkit/core';
import { promises as fs } from 'fs';

describe('Copy File Builder', () => {
  let architect: Architect;
  let architectHost: TestingArchitectHost;

  beforeEach(async () => {
    const registry = new schema.CoreSchemaRegistry();
    registry.addPostTransform(schema.transforms.addUndefinedDefaults);

    // TestingArchitectHost() takes workspace and current directories.
    // Since we don't use those, both are the same in this case.
    architectHost = new TestingArchitectHost(__dirname, __dirname);
    architect = new Architect(architectHost, registry);

    // This will either take a Node package name, or a path to the directory
    // for the package.json file.
    await architectHost.addBuilderFromPackage('..');
  });

  it('can copy files', async () => {
    // A "run" can have multiple outputs, and contains progress information.
    const run = await architect.scheduleBuilder('@example/copy-file:copy', {
      source: 'package.json',
      destination: 'package-copy.json',
    });

    // The "result" member (of type BuilderOutput) is the next output.
    const output = await run.result;

    // Stop the builder from running. This stops Architect from keeping
    // the builder-associated states in memory, since builders keep waiting
    // to be scheduled.
    await run.stop();

    // Expect that the copied file is the same as its source.
    const sourceContent = await fs.readFile('package.json', 'utf8');
    const destinationContent = await fs.readFile('package-copy.json', 'utf8');
    expect(destinationContent).toBe(sourceContent);
  });
});
    

Watch mode link

Architect expects builders to run once (by default) and return. This behavior is not entirely compatible with a builder that watches for changes (like Webpack, for example). Architect can support watch mode, but there are some things to look out for.

• To be used with watch mode, a builder handler function should return an Observable. Architect subscribes to the Observable until it completes and might reuse it if the builder is scheduled again with the same arguments.

• The builder should always emit a BuilderOutput object after each execution. Once it's been executed, it can enter a watch mode, to be triggered by an external event. If an event triggers it to restart, the builder should execute the context.reportRunning() function to tell Architect that it is running again. This prevents Architect from stopping the builder if another run is scheduled.

When your builder calls BuilderRun.stop() to exit watch mode, Architect unsubscribes from the builder's Observable and calls the builder's teardown logic to clean up. (This behavior also allows for long-running builds to be stopped and cleaned up.)

In general, if your builder is watching an external event, you should separate your run into three phases.

Summary link

The CLI Builder API provides a new way of changing the behavior of the Angular CLI by using builders to execute custom logic.

• Builders can be synchronous or asynchronous, execute once or watch for external events, and can schedule other builders or targets

• Builders have option defaults specified in the angular.json configuration file, which can be overwritten by an alternate configuration for the target, and further overwritten by command line flags

• We recommend that you use integration tests to test Architect builders. Use unit tests to validate the logic that the builder executes.

• If your builder returns an Observable, it should clean up in the teardown logic of that Observable

Observables compared to other techniques link

You can often use observables instead of promises to deliver values asynchronously. Similarly, observables can take the place of event handlers. Finally, because observables deliver multiple values, you can use them where you might otherwise build and operate on arrays.

Observables behave somewhat differently from the alternative techniques in each of these situations, but offer some significant advantages. Here are detailed comparisons of the differences.

Observables compared to promises link

Observables are often compared to promises. Here are some key differences:

• Observables are declarative; computation does not start until subscription. Promises execute immediately on creation. This makes observables useful for defining recipes that can be run whenever you need the result.

• Observables provide many values. Promises provide one. This makes observables useful for getting multiple values over time.

• Observables differentiate between chaining and subscription. Promises only have .then() clauses. This makes observables useful for creating complex transformation recipes to be used by other part of the system, without causing the work to be executed.

• Observables subscribe() is responsible for handling errors. Promises push errors to the child promises. This makes observables useful for centralized and predictable error handling.

Creation and subscription link

• Observables are not executed until a consumer subscribes. The subscribe() executes the defined behavior once, and it can be called again. Each subscription has its own computation. Resubscription causes recomputation of values.

  src/observables.ts (observable)

        
          content_copy
        
        // declare a publishing operation
  const observable = new Observable<number>(observer => {
    // Subscriber fn...
  });
  
  // initiate execution
  observable.subscribe(value => {
    // observer handles notifications
  });
      

• Promises execute immediately, and just once. The computation of the result is initiated when the promise is created. There is no way to restart work. All then clauses (subscriptions) share the same computation.

  src/promises.ts (promise)

        
          content_copy
        
        // initiate execution
  let promise = new Promise<number>(resolve => {
    // Executer fn...
  });
  promise.then(value => {
    // handle result here
  });
      

Chaining link

• Observables differentiate between transformation function such as a map and subscription. Only subscription activates the subscriber function to start computing the values.

  src/observables.ts (chain)

        
          content_copy
        
        observable.pipe(map(v => 2 * v));
      

• Promises do not differentiate between the last .then clauses (equivalent to subscription) and intermediate .then clauses (equivalent to map).

  src/promises.ts (chain)

        
          content_copy
        
        promise.then(v => 2 * v);
      

Cancellation link

• Observable subscriptions are cancellable. Unsubscribing removes the listener from receiving further values, and notifies the subscriber function to cancel work.

  src/observables.ts (unsubscribe)

        
          content_copy
        
        const subscription = observable.subscribe(() => {
    // observer handles notifications
  });
  
  subscription.unsubscribe();
      

• Promises are not cancellable.

Error handling link

• Observable execution errors are delivered to the subscriber's error handler, and the subscriber automatically unsubscribes from the observable.

  src/observables.ts (error)

        
          content_copy
        
        observable.subscribe(() => {
    throw new Error('my error');
  });
      

• Promises push errors to the child promises.

  src/promises.ts (error)

        
          content_copy
        
        promise.then(() => {
    throw new Error('my error');
  });
      

Cheat sheet link

The following code snippets illustrate how the same kind of operation is defined using observables and promises.

      
      new Observable((observer) => { 
  observer.next(123); 
});
    

      
      new Promise((resolve, reject) => { 
  resolve(123); 
});
    

      
      obs.pipe(map((value) => value * 2));
    

      
      promise.then((value) => value * 2);
    

      
      sub = obs.subscribe((value) => { 
  console.log(value) 
});
    

      
      promise.then((value) => { 
  console.log(value); 
});
    

      
      sub.unsubscribe();
    

Observables compared to events API link

Observables are very similar to event handlers that use the events API. Both techniques define notification handlers, and use them to process multiple values delivered over time. Subscribing to an observable is equivalent to adding an event listener. One significant difference is that you can configure an observable to transform an event before passing the event to the handler.

Using observables to handle events and asynchronous operations can have the advantage of greater consistency in contexts such as HTTP requests.

Here are some code samples that illustrate how the same kind of operation is defined using observables and the events API.

      
      // Setup 
const clicks$ = fromEvent(buttonEl, 'click'); 
// Begin listening 
const subscription = clicks$ 
  .subscribe(e => console.log('Clicked', e)) 
// Stop listening 
subscription.unsubscribe();
    

      
      function handler(e) { 
  console.log('Clicked', e); 
} 
// Setup & begin listening 
button.addEventListener('click', handler); 
// Stop listening 
button.removeEventListener('click', handler);
    

      
      observable.subscribe(() => { 
  // notification handlers here 
});
    

      
      element.addEventListener(eventName, (event) => { 
  // notification handler here 
});
    

      
      fromEvent(inputEl, 'keydown').pipe( 
  map(e => e.target.value) 
);
    

      
      element.addEventListener(eventName, (event) => { 
  // Cannot change the passed Event into another 
  // value before it gets to the handler 
});
    

Observables compared to arrays link

An observable produces values over time. An array is created as a static set of values. In a sense, observables are asynchronous where arrays are synchronous. In the following examples, → implies asynchronous value delivery.

      
      obs: →1→2→3→5→7
    

      
      obsB: →'a'→'b'→'c'
    

      
      arr: [1, 2, 3, 5, 7]
    

      
      arrB: ['a', 'b', 'c']
    

      
      concat(obs, obsB)
    

      
      →1→2→3→5→7→'a'→'b'→'c'
    

      
      arr.concat(arrB)
    

      
      [1,2,3,5,7,'a','b','c']
    

      
      obs.pipe(filter((v) => v>3))
    

      
      →5→7
    

      
      arr.filter((v) => v>3)
    

      
      [5, 7]
    

      
      obs.pipe(find((v) => v>3))
    

      
      →5
    

      
      arr.find((v) => v>3)
    

      
      5
    

      
      obs.pipe(findIndex((v) => v>3))
    

      
      →3
    

      
      arr.findIndex((v) => v>3)
    

      
      3
    

      
      obs.pipe(tap((v) => { 
  console.log(v); 
})) 
1 
2 
3 
5 
7
    

      
      arr.forEach((v) => { 
  console.log(v); 
}) 
1 
2 
3 
5 
7
    

      
      obs.pipe(map((v) => -v))
    

      
      →-1→-2→-3→-5→-7
    

      
      arr.map((v) => -v)
    

      
      [-1, -2, -3, -5, -7]
    

      
      obs.pipe(reduce((s,v)=> s+v, 0))
    

      
      →18
    

      
      arr.reduce((s,v) => s+v, 0)
    

      
      18
    

Complex animation sequences link

Prerequisites link

A basic understanding of the following concepts:

• Introduction to Angular animations
• Transition and triggers

So far, we've learned simple animations of single HTML elements. Angular also lets you animate coordinated sequences, such as an entire grid or list of elements as they enter and leave a page. You can choose to run multiple animations in parallel, or run discrete animations sequentially, one following another.

The functions that control complex animation sequences are:

The query() function link

Most complex animations rely on the query() function to find child elements and apply animations to them, basic examples of such are:

The first argument of query() is a css selector string which can also contain the following Angular-specific tokens:

Animate multiple elements using query() and stagger() functions link

After having queried child elements via query() , the stagger() function lets you define a timing gap between each queried item that is animated and thus animates elements with a delay between them.

The following example demonstrates how to use the query() and stagger() functions to animate a list (of heroes) adding each in sequence, with a slight delay, from top to bottom.

• Use query() to look for an element entering the page that meets certain criteria

• For each of these elements, use style() to set the same initial style for the element. Make it transparent and use transform to move it out of position so that it can slide into place.

• Use stagger() to delay each animation by 30 milliseconds

• Animate each element on screen for 0.5 seconds using a custom-defined easing curve, simultaneously fading it in and un-transforming it

      
        content_copy
      
      animations: [
  trigger('pageAnimations', [
    transition(':enter', [
      query('.hero', [
        style({opacity: 0, transform: 'translateY(-100px)'}),
        stagger(30, [
          animate('500ms cubic-bezier(0.35, 0, 0.25, 1)',
          style({ opacity: 1, transform: 'none' }))
        ])
      ])
    ])
  ]),
    

Parallel animation using group() function link

You've seen how to add a delay between each successive animation. But you might also want to configure animations that happen in parallel. For example, you might want to animate two CSS properties of the same element but use a different easing function for each one. For this, you can use the animation group() function.

The following example uses group() s on both :enter and :leave for two different timing configurations, thus applying two independent animations to the same element in parallel.

      
        content_copy
      
      animations: [
  trigger('flyInOut', [
    state('in', style({
      width: '*',
      transform: 'translateX(0)', opacity: 1
    })),
    transition(':enter', [
      style({ width: 10, transform: 'translateX(50px)', opacity: 0 }),
      group([
        animate('0.3s 0.1s ease', style({
          transform: 'translateX(0)',
          width: '*'
        })),
        animate('0.3s ease', style({
          opacity: 1
        }))
      ])
    ]),
    transition(':leave', [
      group([
        animate('0.3s ease', style({
          transform: 'translateX(50px)',
          width: 10
        })),
        animate('0.3s 0.2s ease', style({
          opacity: 0
        }))
      ])
    ])
  ])
]
    

Sequential vs. parallel animations link

Complex animations can have many things happening at once. But what if you want to create an animation involving several animations happening one after the other? Earlier you used group() to run multiple animations all at the same time, in parallel.

A second function called sequence() lets you run those same animations one after the other. Within sequence() , the animation steps consist of either style() or animate() function calls.

• Use style() to apply the provided styling data immediately.
• Use animate() to apply styling data over a given time interval.

Filter animation example link

Take a look at another animation on the live example page. Under the Filter/Stagger tab, enter some text into the Search Heroes text box, such as Magnet or tornado .

The filter works in real time as you type. Elements leave the page as you type each new letter and the filter gets progressively stricter. The heroes list gradually re-enters the page as you delete each letter in the filter box.

The HTML template contains a trigger called filterAnimation .

      
        content_copy
      
      <label for="search">Search heroes: </label>
<input type="text" id="search" #criteria
       (input)="updateCriteria(criteria.value)"
       placeholder="Search heroes">

<ul class="heroes" [@filterAnimation]="heroesTotal">
  <li *ngFor="let hero of heroes" class="hero">
    <div class="inner">
      <span class="badge">{{ hero.id }}</span>
      <span class="name">{{ hero.name }}</span>
    </div>
  </li>
</ul>
    

The filterAnimation in the component's decorator contains three transitions.

      
        content_copy
      
      @Component({
  animations: [
    trigger('filterAnimation', [
      transition(':enter, * => 0, * => -1', []),
      transition(':increment', [
        query(':enter', [
          style({ opacity: 0, width: 0 }),
          stagger(50, [
            animate('300ms ease-out', style({ opacity: 1, width: '*' })),
          ]),
        ], { optional: true })
      ]),
      transition(':decrement', [
        query(':leave', [
          stagger(50, [
            animate('300ms ease-out', style({ opacity: 0, width: 0 })),
          ]),
        ])
      ]),
    ]),
  ]
})
export class HeroListPageComponent implements OnInit {
  heroesTotal = -1;

  get heroes() { return this._heroes; }
  private _heroes: Hero[] = [];

  ngOnInit() {
    this._heroes = HEROES;
  }

  updateCriteria(criteria: string) {
    criteria = criteria ? criteria.trim() : '';

    this._heroes = HEROES.filter(hero => hero.name.toLowerCase().includes(criteria.toLowerCase()));
    const newTotal = this.heroes.length;

    if (this.heroesTotal !== newTotal) {
      this.heroesTotal = newTotal;
    } else if (!criteria) {
      this.heroesTotal = -1;
    }
  }
}
    

The code in this example performs the following tasks:

• Skips animations when the user first opens or navigates to this page (the filter animation narrows what is already there, so it only works on elements that already exist in the DOM)
• Filters heroes based on the search input's value

For each change:

• Hides an element leaving the DOM by setting its opacity and width to 0

• Animates an element entering the DOM over 300 milliseconds. During the animation, the element assumes its default width and opacity.

• If there are multiple elements entering or leaving the DOM, staggers each animation starting at the top of the page, with a 50-millisecond delay between each element

Animating the items of a reordering list link

Although Angular animates correctly *ngFor list items out of the box, it will not be able to do so if their ordering changes. This is because it will lose track of which element is which, resulting in broken animations. The only way to help Angular keep track of such elements is by assigning a TrackByFunction to the NgForOf directive. This makes sure that Angular always knows which element is which, thus allowing it to apply the correct animations to the correct elements all the time.

Animations and Component View Encapsulation link

Angular animations are based on the components DOM structure and do not directly take View Encapsulation into account, this means that components using ViewEncapsulation.Emulated behave exactly as if they were using ViewEncapsulation.None ( ViewEncapsulation.ShadowDom behaves differently as we'll discuss shortly).

For example if the query() function (which you'll see more of in the rest of the Animations guide) were to be applied at the top of a tree of components using the emulated view encapsulation, such query would be able to identify (and thus animate) DOM elements on any depth of the tree.

On the other hand the ViewEncapsulation.ShadowDom changes the component's DOM structure by "hiding" DOM elements inside ShadowRoot elements. Such DOM manipulations do prevent some of the animations implementation to work properly since it relies on simple DOM structures and doesn't take ShadowRoot elements into account. Therefore it is advised to avoid applying animations to views incorporating components using the ShadowDom view encapsulation.

Animation sequence summary link

Angular functions for animating multiple elements start with query() to find inner elements; for example, gathering all images within a <div> . The remaining functions, stagger() , group() , and sequence() , apply cascades or let you control how multiple animation steps are applied.

More on Angular animations link

You might also be interested in the following:

• Introduction to Angular animations
• Transition and triggers
• Reusable animations
• Route transition animations

Component interaction link

This cookbook contains recipes for common component communication scenarios in which two or more components share information.

See the live example / download example .

Pass data from parent to child with input binding link

HeroChildComponent has two input properties , typically adorned with @Input() decorator.

      
        content_copy
      
      import { Component, Input } from '@angular/core';

import { Hero } from './hero';

@Component({
  selector: 'app-hero-child',
  template: `
    <h3>{{hero.name}} says:</h3>
    <p>I, {{hero.name}}, am at your service, {{masterName}}.</p>
  `
})
export class HeroChildComponent {
  @Input() hero!: Hero;
  @Input('master') masterName = '';
}
    

The second @Input aliases the child component property name masterName as 'master' .

The HeroParentComponent nests the child HeroChildComponent inside an *ngFor repeater, binding its master string property to the child's master alias, and each iteration's hero instance to the child's hero property.

      
        content_copy
      
      import { Component } from '@angular/core';

import { HEROES } from './hero';

@Component({
  selector: 'app-hero-parent',
  template: `
    <h2>{{master}} controls {{heroes.length}} heroes</h2>

    <app-hero-child
      *ngFor="let hero of heroes"
      [hero]="hero"
      [master]="master">
    </app-hero-child>
  `
})
export class HeroParentComponent {
  heroes = HEROES;
  master = 'Master';
}
    

The running application displays three heroes:

Test it for Pass data from parent to child with input binding link

E2E test that all children were instantiated and displayed as expected:

      
        content_copy
      
      // ...
const heroNames = ['Dr. IQ', 'Magneta', 'Bombasto'];
const masterName = 'Master';

it('should pass properties to children properly', async () => {
  const parent = element(by.tagName('app-hero-parent'));
  const heroes = parent.all(by.tagName('app-hero-child'));

  for (let i = 0; i < heroNames.length; i++) {
    const childTitle = await heroes.get(i).element(by.tagName('h3')).getText();
    const childDetail = await heroes.get(i).element(by.tagName('p')).getText();
    expect(childTitle).toEqual(heroNames[i] + ' says:');
    expect(childDetail).toContain(masterName);
  }
});
// ...
    

Back to top

Intercept input property changes with a setter link

Use an input property setter to intercept and act upon a value from the parent.

The setter of the name input property in the child NameChildComponent trims the whitespace from a name and replaces an empty value with default text.

      
        content_copy
      
      import { Component, Input } from '@angular/core';

@Component({
  selector: 'app-name-child',
  template: '<h3>"{{name}}"</h3>'
})
export class NameChildComponent {
  @Input()
  get name(): string { return this._name; }
  set name(name: string) {
    this._name = (name && name.trim()) || '<no name set>';
  }
  private _name = '';
}
    

Here's the NameParentComponent demonstrating name variations including a name with all spaces:

      
        content_copy
      
      import { Component } from '@angular/core';

@Component({
  selector: 'app-name-parent',
  template: `
    <h2>Master controls {{names.length}} names</h2>

    <app-name-child *ngFor="let name of names" [name]="name"></app-name-child>
  `
})
export class NameParentComponent {
  // Displays 'Dr. IQ', '<no name set>', 'Bombasto'
  names = ['Dr. IQ', '   ', '  Bombasto  '];
}
    

Test it for Intercept input property changes with a setter link

E2E tests of input property setter with empty and non-empty names:

      
        content_copy
      
      // ...
it('should display trimmed, non-empty names', async () => {
  const nonEmptyNameIndex = 0;
  const nonEmptyName = '"Dr. IQ"';
  const parent = element(by.tagName('app-name-parent'));
  const hero = parent.all(by.tagName('app-name-child')).get(nonEmptyNameIndex);

  const displayName = await hero.element(by.tagName('h3')).getText();
  expect(displayName).toEqual(nonEmptyName);
});

it('should replace empty name with default name', async () => {
  const emptyNameIndex = 1;
  const defaultName = '"<no name set>"';
  const parent = element(by.tagName('app-name-parent'));
  const hero = parent.all(by.tagName('app-name-child')).get(emptyNameIndex);

  const displayName = await hero.element(by.tagName('h3')).getText();
  expect(displayName).toEqual(defaultName);
});
// ...
    

Back to top

Intercept input property changes with ngOnChanges() link

Detect and act upon changes to input property values with the ngOnChanges() method of the OnChanges lifecycle hook interface.

This VersionChildComponent detects changes to the major and minor input properties and composes a log message reporting these changes:

      
        content_copy
      
      import { Component, Input, OnChanges, SimpleChanges } from '@angular/core';

@Component({
  selector: 'app-version-child',
  template: `
    <h3>Version {{major}}.{{minor}}</h3>
    <h4>Change log:</h4>
    <ul>
      <li *ngFor="let change of changeLog">{{change}}</li>
    </ul>
  `
})
export class VersionChildComponent implements OnChanges {
  @Input() major = 0;
  @Input() minor = 0;
  changeLog: string[] = [];

  ngOnChanges(changes: SimpleChanges) {
    const log: string[] = [];
    for (const propName in changes) {
      const changedProp = changes[propName];
      const to = JSON.stringify(changedProp.currentValue);
      if (changedProp.isFirstChange()) {
        log.push(`Initial value of ${propName} set to ${to}`);
      } else {
        const from = JSON.stringify(changedProp.previousValue);
        log.push(`${propName} changed from ${from} to ${to}`);
      }
    }
    this.changeLog.push(log.join(', '));
  }
}
    

The VersionParentComponent supplies the minor and major values and binds buttons to methods that change them.

      
        content_copy
      
      import { Component } from '@angular/core';

@Component({
  selector: 'app-version-parent',
  template: `
    <h2>Source code version</h2>
    <button type="button" (click)="newMinor()">New minor version</button>
    <button type="button" (click)="newMajor()">New major version</button>
    <app-version-child [major]="major" [minor]="minor"></app-version-child>
  `
})
export class VersionParentComponent {
  major = 1;
  minor = 23;

  newMinor() {
    this.minor++;
  }

  newMajor() {
    this.major++;
    this.minor = 0;
  }
}
    

Here's the output of a button-pushing sequence:

Test it for Intercept input property changes with ngOnChanges() link

Test that both input properties are set initially and that button clicks trigger the expected ngOnChanges calls and values:

      
        content_copy
      
      // ...
// Test must all execute in this exact order
it('should set expected initial values', async () => {
  const actual = await getActual();

  const initialLabel = 'Version 1.23';
  const initialLog = 'Initial value of major set to 1, Initial value of minor set to 23';

  expect(actual.label).toBe(initialLabel);
  expect(actual.count).toBe(1);
  expect(await actual.logs.get(0).getText()).toBe(initialLog);
});

it("should set expected values after clicking 'Minor' twice", async () => {
  const repoTag = element(by.tagName('app-version-parent'));
  const newMinorButton = repoTag.all(by.tagName('button')).get(0);

  await newMinorButton.click();
  await newMinorButton.click();

  const actual = await getActual();

  const labelAfter2Minor = 'Version 1.25';
  const logAfter2Minor = 'minor changed from 24 to 25';

  expect(actual.label).toBe(labelAfter2Minor);
  expect(actual.count).toBe(3);
  expect(await actual.logs.get(2).getText()).toBe(logAfter2Minor);
});

it("should set expected values after clicking 'Major' once", async () => {
  const repoTag = element(by.tagName('app-version-parent'));
  const newMajorButton = repoTag.all(by.tagName('button')).get(1);

  await newMajorButton.click();
  const actual = await getActual();

  const labelAfterMajor = 'Version 2.0';
  const logAfterMajor = 'major changed from 1 to 2, minor changed from 23 to 0';

  expect(actual.label).toBe(labelAfterMajor);
  expect(actual.count).toBe(2);
  expect(await actual.logs.get(1).getText()).toBe(logAfterMajor);
});

async function getActual() {
  const versionTag = element(by.tagName('app-version-child'));
  const label = await versionTag.element(by.tagName('h3')).getText();
  const ul = versionTag.element((by.tagName('ul')));
  const logs = ul.all(by.tagName('li'));

  return {
    label,
    logs,
    count: await logs.count(),
  };
}
// ...
    

Back to top

Parent listens for child event link

The child component exposes an EventEmitter property with which it emits events when something happens. The parent binds to that event property and reacts to those events.

The child's EventEmitter property is an output property , typically adorned with an @Output() decorator as seen in this VoterComponent :

      
        content_copy
      
      import { Component, EventEmitter, Input, Output } from '@angular/core';

@Component({
  selector: 'app-voter',
  template: `
    <h4>{{name}}</h4>
    <button type="button" (click)="vote(true)"  [disabled]="didVote">Agree</button>
    <button type="button" (click)="vote(false)" [disabled]="didVote">Disagree</button>
  `
})
export class VoterComponent {
  @Input()  name = '';
  @Output() voted = new EventEmitter<boolean>();
  didVote = false;

  vote(agreed: boolean) {
    this.voted.emit(agreed);
    this.didVote = true;
  }
}
    

Clicking a button triggers emission of a true or false , the boolean payload .

The parent VoteTakerComponent binds an event handler called onVoted() that responds to the child event payload $event and updates a counter.

      
        content_copy
      
      import { Component } from '@angular/core';

@Component({
  selector: 'app-vote-taker',
  template: `
    <h2>Should mankind colonize the Universe?</h2>
    <h3>Agree: {{agreed}}, Disagree: {{disagreed}}</h3>

    <app-voter
      *ngFor="let voter of voters"
      [name]="voter"
      (voted)="onVoted($event)">
    </app-voter>
  `
})
export class VoteTakerComponent {
  agreed = 0;
  disagreed = 0;
  voters = ['Dr. IQ', 'Celeritas', 'Bombasto'];

  onVoted(agreed: boolean) {
    if (agreed) {
      this.agreed++;
    } else {
      this.disagreed++;
    }
  }
}
    

The framework passes the event argument —represented by $event — to the handler method, and the method processes it:

Test it for Parent listens for child event link

Test that clicking the Agree and Disagree buttons update the appropriate counters:

      
        content_copy
      
      // ...
it('should not emit the event initially', async () => {
  const voteLabel = element(by.tagName('app-vote-taker')).element(by.tagName('h3'));
  expect(await voteLabel.getText()).toBe('Agree: 0, Disagree: 0');
});

it('should process Agree vote', async () => {
  const voteLabel = element(by.tagName('app-vote-taker')).element(by.tagName('h3'));
  const agreeButton1 = element.all(by.tagName('app-voter')).get(0)
    .all(by.tagName('button')).get(0);

  await agreeButton1.click();

  expect(await voteLabel.getText()).toBe('Agree: 1, Disagree: 0');
});

it('should process Disagree vote', async () => {
  const voteLabel = element(by.tagName('app-vote-taker')).element(by.tagName('h3'));
  const agreeButton1 = element.all(by.tagName('app-voter')).get(1)
    .all(by.tagName('button')).get(1);

  await agreeButton1.click();

  expect(await voteLabel.getText()).toBe('Agree: 0, Disagree: 1');
});
// ...
    

Back to top

Parent interacts with child using local variable link

A parent component cannot use data binding to read child properties or invoke child methods. Do both by creating a template reference variable for the child element and then reference that variable within the parent template as seen in the following example.

The following is a child CountdownTimerComponent that repeatedly counts down to zero and launches a rocket. The start and stop methods control the clock and a countdown status message displays in its own template.

      
        content_copy
      
      import { Component, OnDestroy } from '@angular/core';

@Component({
  selector: 'app-countdown-timer',
  template: '<p>{{message}}</p>'
})
export class CountdownTimerComponent implements OnDestroy {

  intervalId = 0;
  message = '';
  seconds = 11;

  ngOnDestroy() { this.clearTimer(); }

  start() { this.countDown(); }
  stop()  {
    this.clearTimer();
    this.message = `Holding at T-${this.seconds} seconds`;
  }

  private clearTimer() { clearInterval(this.intervalId); }

  private countDown() {
    this.clearTimer();
    this.intervalId = window.setInterval(() => {
      this.seconds -= 1;
      if (this.seconds === 0) {
        this.message = 'Blast off!';
      } else {
        if (this.seconds < 0) { this.seconds = 10; } // reset
        this.message = `T-${this.seconds} seconds and counting`;
      }
    }, 1000);
  }
}
    

The CountdownLocalVarParentComponent that hosts the timer component is as follows:

      
        content_copy
      
      import { Component } from '@angular/core';
import { CountdownTimerComponent } from './countdown-timer.component';

@Component({
  selector: 'app-countdown-parent-lv',
  template: `
    <h3>Countdown to Liftoff (via local variable)</h3>
    <button type="button" (click)="timer.start()">Start</button>
    <button type="button" (click)="timer.stop()">Stop</button>
    <div class="seconds">{{timer.seconds}}</div>
    <app-countdown-timer #timer></app-countdown-timer>
  `,
  styleUrls: ['../assets/demo.css']
})
export class CountdownLocalVarParentComponent { }
    

The parent component cannot data bind to the child's start and stop methods nor to its seconds property.

Place a local variable, #timer , on the tag <app-countdown-timer> representing the child component. That gives you a reference to the child component and the ability to access any of its properties or methods from within the parent template.

This example wires parent buttons to the child's start and stop and uses interpolation to display the child's seconds property.

Here, the parent and child are working together.

Test it for Parent interacts with child using local variable link

Test that the seconds displayed in the parent template match the seconds displayed in the child's status message. Test also that clicking the Stop button pauses the countdown timer:

      
        content_copy
      
      // ...
// The tests trigger periodic asynchronous operations (via `setInterval()`), which will prevent
// the app from stabilizing. See https://angular.io/api/core/ApplicationRef#is-stable-examples
// for more details.
// To allow the tests to complete, we will disable automatically waiting for the Angular app to
// stabilize.
beforeEach(() => browser.waitForAngularEnabled(false));
afterEach(() => browser.waitForAngularEnabled(true));

it('timer and parent seconds should match', async () => {
  const parent = element(by.tagName(parentTag));
  const startButton = parent.element(by.buttonText('Start'));
  const seconds = parent.element(by.className('seconds'));
  const timer = parent.element(by.tagName('app-countdown-timer'));

  await startButton.click();

  // Wait for `<app-countdown-timer>` to be populated with any text.
  await browser.wait(() => timer.getText(), 2000);

  expect(await timer.getText()).toContain(await seconds.getText());
});

it('should stop the countdown', async () => {
  const parent = element(by.tagName(parentTag));
  const startButton = parent.element(by.buttonText('Start'));
  const stopButton = parent.element(by.buttonText('Stop'));
  const timer = parent.element(by.tagName('app-countdown-timer'));

  await startButton.click();
  expect(await timer.getText()).not.toContain('Holding');

  await stopButton.click();
  expect(await timer.getText()).toContain('Holding');
});
// ...
    

Back to top

Parent calls an @ViewChild() link

The local variable approach is straightforward. But it is limited because the parent-child wiring must be done entirely within the parent template. The parent component itself has no access to the child.

You can't use the local variable technique if the parent component's class relies on the child component's class . The parent-child relationship of the components is not established within each component's respective class with the local variable technique. Because the class instances are not connected to one another, the parent class cannot access the child class properties and methods.

When the parent component class requires that kind of access, inject the child component into the parent as a ViewChild .

The following example illustrates this technique with the same Countdown Timer example. Neither its appearance nor its behavior changes. The child CountdownTimerComponent is the same as well.

Here is the parent, CountdownViewChildParentComponent :

      
        content_copy
      
      import { AfterViewInit, ViewChild } from '@angular/core';
import { Component } from '@angular/core';
import { CountdownTimerComponent } from './countdown-timer.component';

@Component({
  selector: 'app-countdown-parent-vc',
  template: `
    <h3>Countdown to Liftoff (via ViewChild)</h3>
    <button type="button" (click)="start()">Start</button>
    <button type="button" (click)="stop()">Stop</button>
    <div class="seconds">{{ seconds() }}</div>
    <app-countdown-timer></app-countdown-timer>
  `,
  styleUrls: ['../assets/demo.css']
})
export class CountdownViewChildParentComponent implements AfterViewInit {

  @ViewChild(CountdownTimerComponent)
  private timerComponent!: CountdownTimerComponent;

  seconds() { return 0; }

  ngAfterViewInit() {
    // Redefine `seconds()` to get from the `CountdownTimerComponent.seconds` ...
    // but wait a tick first to avoid one-time devMode
    // unidirectional-data-flow-violation error
    setTimeout(() => this.seconds = () => this.timerComponent.seconds, 0);
  }

  start() { this.timerComponent.start(); }
  stop() { this.timerComponent.stop(); }
}
    

It takes a bit more work to get the child view into the parent component class .

First, you have to import references to the ViewChild decorator and the AfterViewInit lifecycle hook.

Next, inject the child CountdownTimerComponent into the private timerComponent property using the @ViewChild property decoration.

The #timer local variable is gone from the component metadata. Instead, bind the buttons to the parent component's own start and stop methods and present the ticking seconds in an interpolation around the parent component's seconds method.

These methods access the injected timer component directly.

The ngAfterViewInit() lifecycle hook is an important wrinkle. The timer component isn't available until after Angular displays the parent view. So it displays 0 seconds initially.

Then Angular calls the ngAfterViewInit lifecycle hook at which time it is too late to update the parent view's display of the countdown seconds. Angular's unidirectional data flow rule prevents updating the parent view's in the same cycle. The application must wait one turn before it can display the seconds.

Use setTimeout() to wait one tick and then revise the seconds() method so that it takes future values from the timer component.

Test it for Parent calls an @ViewChild() link

Use the same countdown timer tests as before.

Back to top

Parent and children communicate using a service link

A parent component and its children share a service whose interface enables bidirectional communication within the family .

The scope of the service instance is the parent component and its children. Components outside this component subtree have no access to the service or their communications.

This MissionService connects the MissionControlComponent to multiple AstronautComponent children.

      
        content_copy
      
      import { Injectable } from '@angular/core';
import { Subject } from 'rxjs';

@Injectable()
export class MissionService {

  // Observable string sources
  private missionAnnouncedSource = new Subject<string>();
  private missionConfirmedSource = new Subject<string>();

  // Observable string streams
  missionAnnounced$ = this.missionAnnouncedSource.asObservable();
  missionConfirmed$ = this.missionConfirmedSource.asObservable();

  // Service message commands
  announceMission(mission: string) {
    this.missionAnnouncedSource.next(mission);
  }

  confirmMission(astronaut: string) {
    this.missionConfirmedSource.next(astronaut);
  }
}
    

The MissionControlComponent both provides the instance of the service that it shares with its children (through the providers metadata array) and injects that instance into itself through its constructor:

      
        content_copy
      
      import { Component } from '@angular/core';

import { MissionService } from './mission.service';

@Component({
  selector: 'app-mission-control',
  template: `
    <h2>Mission Control</h2>
    <button type="button" (click)="announce()">Announce mission</button>

    <app-astronaut
      *ngFor="let astronaut of astronauts"
      [astronaut]="astronaut">
    </app-astronaut>

    <h3>History</h3>
    <ul>
      <li *ngFor="let event of history">{{event}}</li>
    </ul>
  `,
  providers: [MissionService]
})
export class MissionControlComponent {
  astronauts = ['Lovell', 'Swigert', 'Haise'];
  history: string[] = [];
  missions = ['Fly to the moon!',
              'Fly to mars!',
              'Fly to Vegas!'];
  nextMission = 0;

  constructor(private missionService: MissionService) {
    missionService.missionConfirmed$.subscribe(
      astronaut => {
        this.history.push(`${astronaut} confirmed the mission`);
      });
  }

  announce() {
    const mission = this.missions[this.nextMission++];
    this.missionService.announceMission(mission);
    this.history.push(`Mission "${mission}" announced`);
    if (this.nextMission >= this.missions.length) { this.nextMission = 0; }
  }
}
    

The AstronautComponent also injects the service in its constructor. Each AstronautComponent is a child of the MissionControlComponent and therefore receives its parent's service instance:

      
        content_copy
      
      import { Component, Input, OnDestroy } from '@angular/core';

import { MissionService } from './mission.service';
import { Subscription } from 'rxjs';

@Component({
  selector: 'app-astronaut',
  template: `
    <p>
      {{astronaut}}: <strong>{{mission}}</strong>
      <button
        type="button"
        (click)="confirm()"
        [disabled]="!announced || confirmed">
        Confirm
      </button>
    </p>
  `
})
export class AstronautComponent implements OnDestroy {
  @Input() astronaut = '';
  mission = '<no mission announced>';
  confirmed = false;
  announced = false;
  subscription: Subscription;

  constructor(private missionService: MissionService) {
    this.subscription = missionService.missionAnnounced$.subscribe(
      mission => {
        this.mission = mission;
        this.announced = true;
        this.confirmed = false;
    });
  }

  confirm() {
    this.confirmed = true;
    this.missionService.confirmMission(this.astronaut);
  }

  ngOnDestroy() {
    // prevent memory leak when component destroyed
    this.subscription.unsubscribe();
  }
}